KeepAlive Ceramic Oxygen Diffusers

CERAMIC DIFFUSERS

DIFFUSER DELIVERY SYSTEMS
A DIFFUSER IS YOUR DELIVERY SYSTEM. DON'T SKIMP. BUY THE BEST!

One of the simplest ways to dissolve oxygen in water is to introduce the oxygen as small bubbles. The smaller the bubbles the more efficient the absorption of oxygen.

Microbubble oxygen diffusers produces a cloud of extremely fine bubbles - 100 to 500 microns. This is much finer than graphite or carborundum diffusers, or porous hose, and because the diffuser is flat, the bubbles do not coalesce as with circular section diffusers.

KeepAlive Diffusers are the finest quality in the industry. A quality diffuser is extremely important. Any lesser quality diffuser will produce larger bubbles and consume more oxygen.

Multiple diffusers can be used with one regulator to feed multiple livewells.

KA970 DIFFUSER

QUALITY AND ECONOMICALLY PRICED!

Stainless Steel Base and Hose Barb

KA970-02 Diffuser $49.95

Features and Benefits

The KA970 is one of the most efficient diffusers on the market. It use less gas and requires fewer diffusers to achieve the same results.
Strong construction. The ceramic plate is set in a stainless steel frame and a stainless steel hose barb.
Easy to install and simple to operate. It requires no power or complex attachment procedures.
Warranty - 2 years covering defective materials and workmanship.

Diffusing Area: 3" Diameter (7.6 cm) 7 sq. inches
Overall Size: 3.4" Diameter (8.6 cm)

The KA970 diffuser requires a regulator with a minimum of 25-35 lbs of output pressure.

KA 975 AND KA9100 DIFFUSERS

KA975 Diffuser

The KA975 diffuser uses an ultra fine pore ceramic plate which ensures uniform bubbles across its entire surface. The ceramic is a clean and inert material.

The KA975 diffuser requires a regulator with a minimum of 25-35 lbs of output pressure.

KA975 Diffuser $79.95
KA9100 Diffuser $99.95

Features and Benefits

The KA975 and KA9100 are the most efficient diffusers on the market. They use less gas and requires fewer diffusers to achieve the same results.
Robust construction. The ceramic plate is set in a rigid enamel coated aluminum frame and will not break if frozen.
Easy to install and simple to operate. It requires no power or complex attachment procedures.
Warranty - 2 years covering defective materials and workmanship.

Bubbling pressure	25 to 35 psi. (1.7 to 2.4 bar)
Absorption efficiency	Largely depends on submerged depth (or operating pressure), typically 40% to 50% at 1m depth; can be as high as 80% or even 100% at depths of 6m or more (also depends on flow rate).

Model	KA975	KA9100
Diffusing area	6" x 1 1/8" (15cm x 3cm)	12 1/8" x 1 1/8" (31cm x 3cm)
Overall size	8 1/2" x 1 3/4" (22cm x 4.5cm)	14 1/2" x 1 3/4" (37cm x 4.5cm)
Weight	0.6lbs (310g)	1.2lbs (535g)
Recommended operating range	up to 0.75 LPM (1.6 SCFH)	up to 1.55 LPM (3.2 SCFH)
Maximum flow rate @ 50 psi (3.5 bar)	2.2 LPM (4.7 SCFH)	4.5 LPM (9.5 SCFH)
Gas inlet connection	3/16" Hose Barb.	3/16" Hose Barb.

KeepAlive Fishing Oxygen Infusion Systems
will keep your fish alive and healthy!